您好,欢迎访问济南七和模具有限公司 !

济南七和模具有限公司

主做模具钢材生产研发,保障质量

全国服务热线

4008379668

    当前位置:首页>新闻中心>新闻动态冷作模具钢需要哪种工作环境

    冷作模具钢需要哪种工作环境

    来源:https://www.jnqhmj.com/ 日期:2021-08-06 发布人:admin


    模具钢分为冷作和热作两种,而冷作模具钢它对环境的要求特别的高,那么在制作冷作模具钢时具体需要哪种工作环境呢?
    Die steel is divided into cold work and hot work, and cold work die steel has particularly high requirements for the environment, so what kind of working environment is needed when making cold work die steel?
    冷作模具钢在工作时.由于冷作模具钢被加工材料的变形抗力比较大,模具的工作部分承受很大的压力、弯曲力、冲击力及摩擦力。
    When the cold working die steel is working, because the deformation resistance of the processed material of the cold working die steel is relatively large, the working part of the die bears great pressure, bending force, impact force and friction force.
    因此,冷作模具钢的正常报废原因一般是磨损.也有因断裂、崩力和变形超差而提前失效的。
    Therefore, the normal scrapping reason of cold working die steel is generally wear, and it also fails in advance due to fracture, collapse force and out of tolerance deformation.
    冷作模具钢与刃具钢相比.有许多共同点。要求模具有高的硬度和耐磨性、高的抗弯强度和足够的韧性,以保证冲压过程的顺利进行、其不同之处在于模具形状及加I工艺复杂.而且摩擦面积大.磨损可能性大.所以修磨起来困难。
    Cold working die steel has much in common with cutting tool steel. The die is required to have high hardness and wear resistance, high bending strength and sufficient toughness to ensure the smooth progress of the stamping process. The difference lies in the complex die shape and i-addition process, large friction area and high wear possibility, so it is difficult to repair.
    因此要求具有更高的耐磨化模具工作时承受冲压力大.又由于形状复杂易于产生应力集中,所以要求具有较高的韧性;
    Therefore, it is required to have higher wear resistance. The die bears large impact pressure when working. Due to the complex shape and easy to produce stress concentration, it is required to have high toughness;
    模具尺寸大、形状复杂.所以要求较高的淬透性、较小的变形及开裂倾向性。
    The die has large size and complex shape, so it requires high hardenability, small deformation and cracking tendency.
    总之,冷作模具钢在淬透性、耐磨性与韧性等方面的要求要较刃具钢高一些。
    In short, the requirements for hardenability, wear resistance and toughness of cold working die steel are higher than those of cutting tool steel.
    而在红硬性方面却要求较低或基本上没要求(因为是冷态成形),所以也相应形成了一些适于做冷作模具用的钢种,例如,发展了高耐磨、微变形冷作模具用钢及高韧性冷作模具用钢等。
    However, in terms of red hardness, it has low or basically no requirements (because it is cold forming), so some steel types suitable for cold working die have been formed accordingly. For example, high wear-resistant, micro deformation cold working die steel and high toughness cold working die steel have been developed.

    咨询热线:4008379668

    邮箱:qihemuju@163.com

    地址:山东省济南市鲍山办事处简家屯村内村委会向西50米

    备案:鲁ICP备19056638号-1

    流量统计:

    网站地图    TXT    XML

    七和模具二维码

    七和模具二维码