您好,欢迎访问济南七和模具有限公司 !

济南七和模具有限公司

主做模具钢材生产研发,保障质量

全国服务热线

4008379668

    当前位置:首页>新闻中心>新闻动态模具钢会存在哪些问题?

    模具钢会存在哪些问题?

    来源:https://www.jnqhmj.com/ 日期:2022-04-18 发布人:admin


    1、钢材料的抗压强度发展潜力并没有获得充分的开发设计钢材料的基础理论抗压强度在9000Mpa以上,而现阶段模具钢h14加工厂家生产的大部分钢树材料的抗压强度约为好几百Mpa。理想化材料与具体花草树木材料中间有较大的留白地区,表明钢材的硬度有较大的突破现状。
    1. The development potential of compressive strength of steel materials has not been fully developed. The basic theoretical compressive strength of designed steel materials is more than 9000Mpa, while at present, the compressive strength of most steel tree materials produced by die steel h14 processing manufacturers is about several hundred MPa. There is a large blank area between idealized materials and specific flowers and trees materials, indicating that the hardness of steel has made a great breakthrough.
    2、钢的低洁净度钢材的低洁净度限定了丁基钢树形材料性能的双向提升。钢中的Lh残渣原素是各种各样裂痕和延性的来源于。伴随着残渣成分的提升,钢的断裂韧性会减少。韧脆变化温度依然存有,限定了其主要用途。现阶段,冷作模具钢加工伴随着钢树冶炼厂技术性的革新和发展,钢树的洁净度获得了提升。例如,在20新世纪70时代,钢的含硫量为0.02%-0.004%,但到了80时期末,含硫量降到0.01%。殊不知,做为人类社会Z重要的构造材料,钢树材料因为其对性能的需求愈来愈高,冷作模具钢报价偏低,被觉得是不可或缺的方式之一。
    2. The low cleanliness of steel limits the two-way improvement of the properties of butyl steel tree material. LH residue element in steel is the source of various cracks and ductility. With the increase of residue composition, the fracture toughness of steel will be reduced. The change temperature of toughness and brittleness still exists, which limits its main application. At this stage, with the technical innovation and development of steel tree smelter, the cleanliness of steel tree has been improved. For example, in the 1970s, the sulfur content of steel was 0.02% - 0.004%, but by the end of the 1980s, the sulfur content decreased to 0.01%. As we all know, as an important structural material in human society, steel tree material is considered to be one of the indispensable ways because of its increasing demand for performance and the low quotation of cold working die steel.
    3、耐腐蚀性需要提升现阶段,钢材材料的腐蚀不合格率等同于下午钢材生产量。尽管总产量为20%-40%,但全世界每一年因腐蚀而损毁的钢材约达1亿多吨:研究表明,钢材的腐蚀与其说洁净度有挺大关联,可使钢材的腐蚀率翻番。
    3. Corrosion resistance needs to be improved. At this stage, the corrosion unqualified rate of steel materials is equal to the steel production in the afternoon. Although the total output is 20% - 40%, more than 100 million tons of steel are damaged by corrosion every year in the world: research shows that the corrosion of steel is closely related to its cleanliness, which can double the corrosion rate of steel.
    以上就是为大家介绍的有关济南模具钢的详细介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务https://www.jnqhmj.com
    The above is the detailed introduction of Jinan die steel. I hope it will help you If you have any questions, please contact us We will provide you with professional service https://www.jnqhmj.com

    咨询热线:4008379668

    邮箱:qihemuju@163.com

    地址:山东省济南市鲍山办事处简家屯村内村委会向西50米

    备案:鲁ICP备19056638号-1

    流量统计:

    网站地图    TXT    XML

    七和模具二维码

    七和模具二维码